Views: 0 Author: Site Editor Publish Time: 2024-03-01 Origin: Site
Swimming can not only improve cardiovascular function but also promote metabolism. For pool operators, how to extend the summer is key. If you want to enjoy swimming in the pool all year round, the choice of temperature control heating equipment is important. In response to the call for energy saving and environmental protection, in recent years, more and more pool operators choose DC inverter swimming pool heat pumps to achieve intelligent heating control of pool water temperature. Next, let's introduce the precautions for the operation of the DC inverter swimming pool heat pump in detail.
The introduction of a DC inverter swimming pool heat pump
DC inverter swimming pool heat pump precautions
The so-called pool heat pump, namely the use of better corrosion resistance titanium tube water heat exchanger. Similar to the working principle of ordinary heat pumps, a DC inverter swimming pool heat pump also absorbs the endless flow of free energy in the air to achieve the purpose of heating. Compared with the traditional coal-fired boiler, which leads to a large fluctuation in water temperature, the pool heat pump runs intelligently and automatically throughout the whole process, without special duty. From the root of the water temperature caused by cold and hot hand and foot cramps and other phenomena.
During the operation of the DC inverter swimming pool heat pump, the following points should be paid attention to:
1, The heat pump host machine needs to be installed in the air circulation, open sunny, and away from the rest area, the equipment needs to keep more than a 1-meter distance from the wall. In the installation of the DC inverter swimming pool heat pump should be reserved wide enough space for daily maintenance and inspection.
2, To ensure the heating efficiency of the pool heat pump, the DC inverter swimming pool heat pump around the unit does not accumulate any debris.
3. Regularly check the power supply and electrical components of the DC inverter swimming pool heat pump unit. If there is an anomaly, it should be repaired and replaced immediately to prevent leakage accidents.
4, A DC inverter swimming pool heat pump host should be set up separately off, do not switch machine operation through the main power supply.
5, Do not close the unit to flammable and explosive gas or liquid, DC inverter swimming pool heat pump unit installation should be far away from the heat source, steam source, or waste gas source.
6, Pool heat pump ambient temperature -10~38℃, water pressure 0.20~0.6Mpa. If a DC inverter swimming pool heat pump is used outside the above environment, the effect of the heat pump will be greatly reduced.
7. Before cleaning the pool heat pump unit, keep the DC inverter swimming pool heat pump in a power-cut state. In the state of long-term non-use, the residual water quality in the condenser should be drained.
8, To reduce the vibration frequency of the unit, the need to install a shock pad and fix screws around the DC inverter swimming pool heat pump unit.
DC inverter swimming pool heat pump according to the above rules, the correct operation can improve the efficiency of use.
Linuo Ritter International Co., Ltd is committed to research and production, if you want to buy it, you can contact us.
